Search This Site

Search With Google

Wagner MMC220

Wagner Moisture Meters

Wagner MMC210 Pinless Wood Moisture Meter

 

Moisture Meter. Wood Moisture Meter. Concrete Moisture Meter. Building Moisture Meter. Garden Moisture Meter. Humidifier. Privacy Policy.

Incorporates IntelliSense Technology so surface moisture does not affect results

 

Moisture detection range of 5% - 30%

 

Clear digital display

 

Precision readings of 0.1%

 

Measuring depth capabilities up to ¾ of an inch

 

Non intrusive

 

Programmable for species settings

 

A sensing area of 1.5 x 2.5 inches

 

Press and hold feature for reading

 

Domestic woods

 

 

Wagner L606

Wagner L607

Also On This Site

Wood moisture meter

Concrete moisture meter

Garden moisture meter

Builders moisture meter

 

The Wagner MMC210 is an ideal moisture meter for anyone involved in floor manufacturing and installing. Cabinet and furniture makers also find the MMC210 a suitable device to use. Suppliers of lumber and timber inspectors also swear by this model.

Moisture Meter Store

Wagner C575

The complete moisture meter website

Moisture Meter Guide

To Care Is To Share

Wagner MMI1100

Wagner MMC210

Wagner MMC205

Wagner BI2200

Features

 

Specs

Length       4 9/16”

 

Width        2 ¾”

 

Height        1 1/16”

 

Weight       0.37 lbs

 

Power        9 volt battery

The Wagner MMC210 moisture meter is an excellent meter for use with wood flooring and woodworking. It works superbly well with hardwood and softwood species of timber, but if you are planning on working with tropical exotic species then the more advanced MMC220 is the moisture meter for you. This model can be used on other building materials that have similar densities to wood.

 

Again the good Wagner design makes this meter a pleasure to have and use. The readings are given quickly and accurately and once finished working with, the meter fits nicely in to the pocket.

Using The Wagner MMC210 Moisture Meter

 

 

Turning the moisture meter on is done by pressing the on/hold button and gently releasing. Once a reading has been obtained, pressing the hold button will freeze the reading for you. After 60 seconds of no use or no button pushing the meter will turn itself off thanks to the energy saving auto shut off feature. Again and again this meter proves it’s worth in difficult to get to places for testing moisture content.

 

Before you take a measurement reading with the MMC210 you need to sure that you have set specific gravity setting correctly or you will get a wrong reading for your particular wood.

 

For taking a reading you need to ensure that the sensor plate of the meter has good contact with the testing subject. If there is any surface moisture present before testing, you need to wipe it away and allow the surface to dry for a short time.

 

For wood that is thinner than the scan depth of the meter you must create an air gap under the wood before testing. The air gap should be about 1 inch and there should be nothing under the wood, particularly no metal.

The moisture meter is an expensive product and quite sensitive so you need to store it correctly to keep it in tip top working condition. Never store it in extremely hot or extremely cold places and do always store it inside it’s case.

 

Your moisture meter will have been calibrated at the Wagner factory and not re-calibration again. However if problems or issues do occur and you need a calibration adjustment, then the meter must be returned to the Wagner factory to be re-calibrated properly.

Moisture Meter Guide 2010                                                                                               Contact details:garnett65@hotmail.com